PRODUCT LEGAL DISCLAIMER

ALL PRODUCTS, PRODUCT SPECIFICATIONS, AND OTHER DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Texas Components Corporation, its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively referred to hereafter as “Texas Components Corporation”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.

The product specifications do not expand or otherwise modify Texas Components Corporation’s terms and conditions of purchase, including but not limited to, the warranty expressed therein.

Texas Components Corporation makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Texas Components Corporation disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.

Information and/or specifications provided in datasheets or provided otherwise may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Texas Components Corporation’s knowledge of typical requirements that are often placed on Texas Components Corporation’s products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.

No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Texas Components Corporation.

Unless expressly stated otherwise, Texas Components Corporation’s products are not designed for use in life-saving or life-sustaining applications. Customers using or selling Texas Components Corporation’s products for use in such applications do so entirely at their own risk and agree to fully indemnify Texas Components for any damages arising or resulting from such use or sale. Please contact authorized Texas Components Corporation personnel to obtain the written terms and conditions regarding products expressly designed for such applications.

< Back to Newsletter Page

The post Product Legal Disclaimer appeared first on TXCC Test Store Site.

CONTACT TEXAS COMPONENTS

Contact us today for more information, quotes, and any special requests:

Texas Components Corporation
1716 West Sam Houston Pkwy North
Houston, TX 77043
USA

Phone: (+1) 713-468-3882
Fax: (+1) 713-461-2098
Email: txccsales@texascomponents.com

< Back to Newsletter Page

The post Contact Information appeared first on TXCC Test Store Site.

Ordering Terms and Conditions

Prices and Availability: The lead time options available for non-stocked items will be provided to you, along with pricing, in response to your specific quote request. (See our quote request form link above). As with all product specifications, all prices are subject to change at any time – so please refer to our datasheets and/or contact our sales staff with any questions or concerns.

Payments: Customers (domestic or international) who do not have a credit account established with us must pay in advance of shipment (and usually at the time of order). This is made easy to do via PayPal or major credit card – for which we may charge a small surcharge to cover our additional expense when using such services.

Cost of shipping and risk of loss or damage during shipping: Regardless of the method of payment, our company policy is that all quotes are made and orders accepted FOB, EXW or CPT our location: Texas Components/Houston, TX, USA – meaning, all shipping costs, taxes, tariffs, duties, and all risks and responsibility of delivery (including risks of loss) are assumed by, borne by, and the responsibility of you (the customer) after the products leave our possession and our facility. Texas Components is not responsible for lost or damaged shipments – so let’s work together to choose the best carrier and shipping method for you and your orders.

Shipping carriers and methods: Our policy is that we will ship only by methods and with carriers that can be accommodated completely by our in-house systems (UPS, FedEx, DHL, USPS) and that support “proof of delivery”. We can ship using your account with such carriers, or we can use our own account and add the cost of shipping/handling to your order (in which case all orders and charges are subject to a final modification based on the ultimate nature of the package and shipping method.) A few shipping carriers and methods automatically include a nominal amount of insurance, but, in general, shipments are not insured unless you make such an arrangement with your insurance provider or within your account agreement with your own carrier or, for each order and shipment, you provide specific written instructions to us that we should, when using our carriers, also add (and charge for) carrier provided insurance.

Small and international customers: As mentioned, Texas Components orders are quoted and filled FOB our location in Houston, Texas. Many methods exist to ship your order, including methods that can a) prove we did actually ship your order, b) provide prompt delivery, c) prove you actually received your order, and d) insure against lost or damage (e.g. Federal Express, UPS, DHL, USPS Global Express Guaranteed or USPS Express International). However sometimes, especially for small and international customers, the cost of such shipping methods can be high compared to the value of a the order. In such cases, we can ship by USPS First Class International or other untracked/uninsured methods if you prefer, so you can enjoy the reduced cost of that method, BUT you must recognize, understand, and accept that USPS First Class International to some locations (and even some forms of USPS Priority International to some locations) will not provide any tracking, proof of delivery, or insurance, and that, once the shipment leaves our offices, Texas Components has no control of or responsibility for its ultimate passage through customs and/or its ultimate delivery to you. So please choose the shipping method you feel best meets your needs and expectations, and appreciate that we just cannot be responsible for the mail services in your country.

Quality Systems: The proprietary quality system employed by Texas Components was developed over 37 years of service and, in particular, was created in response to the need to meet military specification compliance requirements. Texas Components does not currently engage third party certifiers but, instead, is audited quarterly and, more fully, annually by Vishay Precision Group, Inc. (VPG) as part of the manufacturing and distribution license that authorizes Texas Components to manufacture Bulk Metal Foil resistors and related products here in North America. In lieu of relying on a third party certification, our quality system is often reviewed and approved by the quality department of the major customers we regularly serve prior to the initiation of such service, including such customers in demanding aerospace industry. This approach has, over these many years, proven more focused, efficient, and effective as the nature of various third party certifications has been changing in scope and import. Texas Components welcomes any requirement you might have to meet your quality expectations and requirements.

Returns, Exchanges, & Cancellations: Our products are primarily custom made to order and we begin making plans and acquiring materials as soon as the order is placed. So, with very few, very limited, very rare exceptions, all orders placed are non-cancellable and non-returnable i.e. ALL SALES ARE FINAL.

Other Terms: Please see our Web Site Use Terms and Conditions notice at the bottom of this page for more terms, notices, and disclosures.

< Back to Newsletter Page

The post Ordering Terms appeared first on TXCC Test Store Site.

THE ADVANTAGES OF USING TEXAS COMPONENTS
(Why Choose Texas Components?)

• Genuine Licensed/Authorized Manufacturer (Precision Center) & Distributor of Vishay Precision Group (VPG) Bulk Metal® Foil resistors and related products.
• Largest, most experienced, and most technically capable USA manufacturer of Bulk Metal® Foil resistors and related or derivative products.
• Over 100 years combined experience embedded on staff as scientists, electrical engineers, and mechanical engineers specifically trained and experienced in manufacturing quality Bulk Metal® Foil resistors and derivative products.
• Over 300 years of experience embedded on staff specifically handling, manufacturing, testing, and delivering Bulk Metal® Foil and derivative products.
• Strong production capabilities and technical competence, but small company service mentality, approachability, and flexibility.
• Current capacity of over a million resistors a year, readily expanded (tens of millions produced already here in the USA).
• You get a direct relationship with the manufacturer AND access to skilled engineering and quality control on-site together in the same location in the USA.
• Over 30 years of service and experience specifically in manufacturing Bulk Metal® Foil products.
• Over 30 years of exemplary quality reputation and delivery record.
• Greatest combined scientific, engineering, manufacturing, and delivery capability in the Americas – all in one location. [This is not a sideline business for us – this is what we do!)
• Texas Components can work directly with your designers and engineers to conceive and manufacture special solutions to your needs, including custom physical configurations, environments, and power ratings – as well as discrete unit parametric screening/testing, power conditioning, burn-in, and life-testing.
• Texas Components has numerous custom designs and even proprietary products of our own utilizing Bulk Metal® Foil and complementary technologies.

Email, phone or fax us your performance wish list for our applications engineers to study – we will make or find a solution for you!

Our experienced Applications Engineers and friendly Sales Staff are available and eager to assist you!

Contact us today for more information or a quote:

< Back to Newsletter Page

The post Why Texas Components? appeared first on TXCC Test Store Site.

COMPANY BACKGROUND AND DEVELOPMENT

Texas Components Corporation has been involved in the electronic component sales and distribution industry since the 1960’s, including representing Vishay Intertechnology, Inc. products since the 1970’s. In 1980, Texas Components became an authorized manufacturer and marketer of Vishay (now Vishay Precision Group, or VPG) Bulk Metal® Foil resistive technologies and related products. By the 1990’s, Texas Components had established a division exclusively focused on the support of Bulk Metal® Foil resistors and the development of custom designs as well as derivative products and applications using VPG’s Bulk Metal® Foil technology. Bulk Metal® Foil technology often plays an important role in the custom packaged network devices and multi-chip modules designed and manufactured by the other divisions of Texas Components.

The special characteristics of Texas Component’s Resistive Products Division include: a) a specialized employee structure, training, and experience set dedicated to Bulk Metal® Foil technology and product performance; b) a low physical plant profile with heightened customer service and responsiveness; and c) an unwavering focus on quality manufacturing and accurate delivery of Bulk Metal® Foil resistive technologies and the development of related and derivative designs and applications.

The unique design of VPG’s Bulk Metal® Foil makes possible superior product designs and performance that are just not possible with any other technology. The same design features that create this outstanding performance also allow for precise customization in any quantity. Dr. Felix Zandman, the founder of Vishay and the developer of the Bulk Metal® Foil technology, wanted to insure that, as his company became larger and more diversified, customer responsiveness be maintained at the highest possible level, through multiple supply chain channels and choices.

To this end, and in order to provide complete customization of resistor specifications, Dr. Zandman developed the Precision Center concept – allowing for the manufacture of Bulk Metal® Foil resistors in facilities more proximate and responsive to it’s customers. Texas Components was asked to participate in this program and has since grown to be the largest, most experienced, and most technically capable in the Americas, having also developed numerous custom designs and even proprietary products using Bulk Metal® Foil technology.

Texas Components has the only million unit+ capacity manufacturing facility in the Americas today, and, with over three decades of experience manufacturing these products, is the most experienced and technically capable USA manufacturer of Bulk Metal® Foil resistors. Texas Components is recognized not only for reliable delivery of products, but for both engineering design services as well as quality control and troubleshooting expertise. This is not a sideline business for Texas Components, as it is for others, nor are we a small one or two person operation – this is what we do and what we focus on every day.

Texas Components has on staff now experienced scientists, electrical engineers, and mechanical engineers with, combined, over 100 years worth of training and experience specifically in mastering the manufacture of VPG Bulk Metal® Foil resistors and the development of derivative designs. Texas Components also has embedded on staff over 300 combined years of experience specifically in the handling, manufacturing, testing, and delivery of Bulk Metal® Foil technology and related products. Only at VPG’s own headquarters in Israel could you find such depth, experience, and capabilities of personnel and operations in one location.

While Texas Components has the strong production capabilities and technical competence needed to meet the needs of the most demanding industries and businesses, we work hard to also maintain a small company service mentality, with the approachability and flexibility all businesses need to meet challenging delivery schedules.

< Back to Newsletter Page

The post About Texas Components appeared first on TXCC Test Store Site.